York YCAL Series - Page 27

FORM 150.66-NM3
ISSUE DATE: 09/25/2020
27
JOHNSON CONTROLS
SECTION 2 - PRODUCT DESCRIPTION
2
PRODUCT IDENTIFICATION NUMBER (PIN) (CONT’D)
FEATURE DESCRIPTION OPTION DESCRIPTION
DWP DWP (PIN 38)
X 150 psig DWP Waterside
3 300 psig DWP Waterside
Q Special DWP
INS Insulation (PIN 39)
X Standard Insulation
D Double Thick Insulation
Q Special Insulation Required
FLANGES Flanges (PIN 40)
X Standard Victaulic
V Victaulic to Flange Adapter
Q Special Flanges Required
FLOW Flow Switch (PIN 41)
X No Flow Switch Required
S One Flow Switch Required
T Two Flow Switches Required
U Three Flow Switches Required
D One Di󰀨erential Pressure Switch
Required
E Two Di󰀨erential Pressure Switches Re-
quired
F Three Di󰀨erential Pressure Switches Re-
quired
Q Special Flow Switch Required
VESSEL Vessel Codes (PIN 42)
X UL Pressure Code Vessel
A ASME Pressure Vessel Code
Q Special Pressure Vessel Code
CLR Cooler (PIN 43)
X Standard Cooler Required
R Remote Cooler Required
Q Special Cooler Required
PIN 44 (PIN 44)
X No Option Required
Q Special Quote
COILS Coils (PIN 45)
X Aluminum Coil
B Pre-Coated Fin Coil
C Copper Coil
P Post-Coated Dipped Coil
Q Special Coil
PIN 46 (PIN 46)
X No Option Required
Q Special Quote
FANMOTORS Fan Motors (PIN 47)
X TEAO Fan Motors
Q Special Fan Motors Required
ENCL Enclosure Panel (PIN 48)
1 Wire Enclosures-Factory
7 Louvered Enclosure-Factory
Q Special Enclosures Panels
ACOUSTIC Acoustic Blanket (PIN 49)
X No Acoustic Blanket Required
B Acoustic Blanket Required
Q Special Acoustic Blanket Required
PIN 50 (PIN 50)
X No Option Required
Q Special Quote