York YR - Specialty Screens and Controls

FORM 160.81-O1 (1020)
ISSUE DATE 10/05/2020
31
JOHNSON CONTROLS
SECTION 2 - OPTIVIEW™ CONTROL CENTER
2
SENSITIVITY SCREEN
Overview
This screen, accessed from the EVAPORATOR screen,
displays a cutaway view of the evaporator. The Leav-
ing Chilled Liquid Temperature Control Sensitivity
setpoints are programmed on this screen.
Display Only
None
Programmable
Period
Access Level Required: SERVICE
Service Technicians refer to Special Setpoints sec-
tion of OptiView Control Center Service Instructions
(Form 160.81-M1).
Error
Access Level Required: SERVICE
Service Technicians refer to Special Setpoints sec-
tion of OptiView Control Center Service Instructions
(Form 160.81-M1).
Rate
Access Level Required: SERVICE
Service Technicians refer to Special Setpoints sec-
tion of OptiView Control Center Service Instructions
(Form 160.81-M1).
Max Load Pulse
Access Level Required: SERVICE
Service Technicians refer to Special Setpoints sec-
tion of OptiView Control Center Service Instructions
(Form 160.81-M1).
Max Unload Pulse
Access Level Required: SERVICE
Service Technicians refer to Special Setpoints sec-
tion of OptiView Control Center Service Instructions
(Form 160.81-M1).
Navigation
Access Level Required: SERVICE
Home
Access Level Required: VIEW
Causes an instant return to the HOME screen.
Evaporator
Access Level Required: SERVICE
Returns to the Evaporator screen.
FIGURE 7 - SENSITIVITY SCREEN
00650VIP