York YR - Custom Setup Screen; Figure 29 - Custom Setup Screen

JOHNSON CONTROLS
72
FORM 160.81-O1 (1020)
ISSUE DATE 10/05/2020
SECTION 2 - OPTIVIEW™ CONTROL CENTER
Optiview Control Center
CUSTOM SETUP SCREEN
Overview
This screen allows the Service Technician to select up
to 10 parameters for display on the CUSTOM SETUP
screen.
Display Only
Slot Numbers
Lists the available parameters that can be displayed.
The desired parameters for display are selected from
this list.
Programmable
Page Up
Access Level Required: SERVICE
Scroll up through list of available parameters.
Page Down
Access Level Required: SERVICE
Scroll down through list of available parameters.
Select
Access Level Required: SERVICE
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of
the parameter(s) to be displayed. Pressing the SELECT
key places a green colored selection box around Cus-
tom Slot 1. If it is desired to change an already entered
parameter, use the 5 and 6 keys to place the selection
box around the slot number to be changed. With the
selection box around the slot number to be changed or
entered, press the ENTER (√) key. A dialog box is dis-
played permitting data entry. Using the numeric key-
pad keys, enter the desired slot number and press the
ENTER (√) key.
Custom Slot (1-10)
Access Level Required: SERVICE
Use the SELECT key and numeric keypad keys as
described above and enter the slot number from Slot
Numbers list. Setting the Slot number to zero clears the
display of this slot number.
Navigation
Home
Access Level Required: SERVICE
Causes a return to the HOME screen.
Custom View
Access Level Required: SERVICE
Causes a return to the CUSTOM VIEW screen.
FIGURE 29 - CUSTOM SETUP SCREEN
00241VIP