1716
Start measuring
Start measuring
Don't eat, smoke, drink, take bath or do any
high-intensity sport within an hour before
measuring. Measurements shall be taken at
the same time every day.
Sit still for 5 minutes before the measurement
All icons on screen appear for 1 sec after
pressing the " " button, then disappear. After
that " " flickers which the deflation icon means
the system is in zero testing. Several seconds
later the inflation icon " " flashes which means
the zero testing is finished. Then inflation starts.
1. Measurement
Full screen display state
The zeroing state
The inflation state
The monitor starts measuring automatically after
inflation finished, and the measuring icon " "
starts to flicker, pressure release value starts to
decrease gradually.
Please relax as much as possible and not talk or
move during the measurement procedure.
After measurement, the monitor will show the
SYS, DIA and pulse rate, then daflate the air
automatically.
2. Measurement finished
The measuring state
mmHg display
kPa display
SYS
mmHg
DIA
mmHg
P/min
To Next Page
Loading...
