18
19
Start measuring
4. Shut down
3. Take off the cuff
Press the " " button to shut down. Also it will
power off automatically in 3 minutes without any
operation.
Blood pressure range indicator
5. Power off
Unplug the adapter to safely disconnect it from
mains.
Do not position the device to make it difficult for
safely disconnection from supply mains.
If the SYS is higher than 139mmHg or DIA
higher than 89mmHg means having high blood
pressure, please contact with doctor for advice.
The blood pressure range indicator can show
the blood pressure intuitively.
Tips!
The time interval between two measurements
should be at least 2 ~3 minutes or longer.minutes
Estimate the blood pressure condition according
to the BP classification table, and consult the
doctor.
If the measurement need stoping
for
uncomfortableness or other reasons, please press
the " " button, the measurement will stop
immediately and air releases fast. Take off the cuff
manually if the " " button is not working.
Emergency stop during measurement
Warning: Upper limit pressure of air inflation
is 300 mmHg/40.0 kPa. Don't keep the inflated
state for a long time to avoid damage.
If unexpected readings are obtained, please
measure again or consult your doctor.
Higher than 139mmHg
Higher than 89mmHg
SYS
mmHg
DIA
mmHg
P/min
To Next Page
Loading...
