The monitor will store the measurement data
automatically (including blood pressure and
pulse), and the upper limit of records is 90. Press
the " " button to check the records.
1. Press the " " button for the records.
A. Press the " " button to show the average
value of the latest 3 times measurement.
B. Repress the " " button to display the 1st
group of memory, the serial number is displayed
as "1" to "90". "1" is the latest group and the "90"
is the earliest one.
C. Read the recorded data by pressing the " "
button as the sequence: "1", "2" ......"90" (max).
Then return to the 1st. Holding the " " button
to search the data quickly.
D. Press the " " button to shut off the monitor.
2. Delete the recorded data
Press the both " " button and " " button
until the display shown as the picture, which
means the recorded data is cleared.
Press the " " button to turn off the monitor
after deleting.
Note: This operation will delete all of the
recorded data.
20
21
Memory function Memory function
Tips!
Tips!
The 90th data may be replaced by the 89th when
the memory capacity is full.
The average value The 1st group of memory
To Next Page
Loading...
