Engish •
Find more information at www.zacorobot.eu 13
Product operation
Starting up / Pause / Sleep
• Sleep mode: The power switch is on and the Auto cleaning indicator light is not
ashing. The robot is currently not cleaning.
• Standby mode: The power switch is on and the Auto button indicator light is
ashing. The robot is currently not cleaning.
• Cleaning mode: The Auto button indicator light is ashing. The robot is currently
cleaning.
1
Starting up
Press on the robot or press on the remote control to start cleaning.
2
Pause
The pause function switches between cleaning mode and standby mode.
Press on the robot or on the remote control to stop the cleaning process.
3
Sleep mode
To enter sleep mode: Press and hold the button on the robot for 3 seconds. The
robot will then switch to sleep mode if no further instructions are given within 1 minute.
Note: If the robot is in sleep mode, press to enter standby mode.
When you press again, the robot will start cleaning.
Note: When the robot is paused, press
on the device or on the remote
control to restart the cleaning process.
To Next Page
Loading...
