Engish •
Find more information at www.zacorobot.eu 15
Product operation
2
Spot mode
This mode is applicable for an area with highly
concentrated dirt or dust. In the spot cleaning
mode, the robot will focus on cleaning one
specic area in a circular path. After cleaning is
nished, it will return to the charging station.
3
MAX mode
This mode is ideal for very dirty oors. Press
to increase the suction power to clean very dusty
areas. Press again to switch back to normal
suction power.
4
Return to charging station
During the cleaning process, the robot can sense low
battery and will automatically search for the charging
station when charging is required.
It is also possible to press the
button on the
remote control to instruct the robot to return to
its charging station.
To Next Page
Loading...
