How to activate my Zanussi ZDLN1510 Dishwasher?
To resolve the issue of your Zanussi Dishwasher not activating, ensure the mains plug is securely connected to the mains socket and check for any damaged fuses in the fuse box, replacing them if necessary.
How to remove limescale deposits from Zanussi ZDLN1510 Dishwasher?
If you notice limescale deposits on the tableware, tub, or inside the door of your Zanussi Dishwasher, check if the level of salt is low and refill if necessary. Ensure the cap of the salt container is tightly closed. If you have hard tap water, refer to "The water softener". Even when using multi-functional tabs, use salt and set regeneration of the water softener. If limescale persists, clean the appliance with suitable detergents or try a different detergent. You may also contact the detergent manufacturer.
Why is my Zanussi ZDLN1510 Dishwasher leaking from the door?
If you notice a small leak from your Zanussi Dishwasher door, the appliance may not be level. Loosen or tighten the adjustable feet. If the door is not centered on the tub, adjust the rear foot.
What to do if Zanussi ZDLN1510 Dishwasher does not fill with water?
If your Zanussi Dishwasher is not filling with water, make sure of the following: * The water tap is completely open. * The water supply pressure is adequate. Contact your local water authority for information on water pressure. * The water tap is not clogged. * The filter in the inlet hose is not clogged. * The inlet hose has no kinks or bends.
What to do if Zanussi ZDLN1510 does not drain the water?
If your Zanussi Dishwasher isn't draining water, check the following: * Ensure the sink spigot is clear from any blockages. * Verify that the interior filter system is not clogged. * Confirm the drain hose is free of kinks or bends.
How to fix a leaking Zanussi ZDLN1510 Dishwasher door?
If you notice a small leak from the door of your Zanussi Dishwasher, the appliance might not be level. Try adjusting the feet. Also, the door might not be centered on the tub, so adjust the rear foot if applicable.
What to do if Zanussi Dishwasher does not drain water?
If your Zanussi Dishwasher isn't draining water, ensure the sink spigot and the interior filter system are not clogged. Also, check the drain hose for any kinks or bends.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Control panel colour | White |
| Noise Level | 49 dB |
| Number of Washing Programs | 5 |
| Delayed Start Timer | Yes |
| Delay Start (max) | 24 hours |
| Energy Efficiency Class | F |
| Energy Consumption per Cycle | 1.039 kWh |
| Annual Energy Consumption | 295 kWh |
| Drying Class | A |
| Half Load Option | No |
| Child Lock | No |
| Drying system | Residual heat |
| Product size | 60 cm |
| Number of Place Settings | 13 |
| Wash Programs | Eco, Intensive, Normal, Quick |
| Water Consumption per Cycle | 11 litres |
| Annual Water Consumption | 3080 L |
| Programs | Eco, Intensive, Normal, Quick |
To Next Page
