Zapi AC-0 SSL - AC-0 SSL Inverter Specifications; Technical Specifications; Block Diagram

AE0ZP0EC - AC-0 SSL SENSORED - User Manual Page - 7/100
2 SPECIFICATION
2.1 Technical specifications
Inverter for AC asynchronous 3-phase motors
Regenerative braking
Can-bus interface
Digital control using a microcontroller
Encoder Interface
Voltage:.................................................................................................... 24 – 36 V
Maximum current (24 V, 36 V): ..................................................150 A (RMS) for 2'
Maximum current (48 V):............................................................120 A (RMS) for 2'
Booster (all version): .................................................. 170 A (RMS) for 10 seconds
Operating frequency:..............................................8 kHz with center aligned PWM
External temperature range: ............................................................ -30 °C ÷ 40 °C
Maximum inverter temperature (at full power): ...............................................78 °C
2.2 Block diagram
Figure 2–1