AE0ZP0EC - AC-0 SSL SENSORED - User Manual Page - 79/100
10.6 Description of the battery charge detection setting
The Battery Charge detection uses two setting that specify the Full Charge
Voltage Level (100%) and the Discharge Voltage Level (10%). These two
settings are the ADJUSTMENT#01 and the ADJUSTMENT#02 (see
“Adjustments” submenu). It is possible to adapt the Battery Charge Detection to
your specific battery, by changing the above two settings (e.g. if the Battery
Discharged Detection occurs when the battery is not totally discharged, it is
necessary to reduce the ADJUSTMENT #02 setting as indicated in the Figure
10–3 below).
Figure 10–3
To Next Page
Loading...
