zarges PaxTower S-PLUS 1T User Manual

41
3.3 Assembling scaffold towers of size 2
1. Assemble the base unit
(see “Assembling the
base unit” on page39).
2. Remove the end caps
on the tubes where
necessary.
3. Attach the horizontal
brace to lowermost
rung.
4. Use a spirit level to en-
sure the scaffold tower
is vertical.
5. Install all four stabilis-
ers and ensure all of
them touch the ground.
For information on positioning
the stabilisers, see “Basic
dimensions” is on page 52.
1.
2.

zarges PaxTower S-PLUS 1T Specifications

General

Brand	zarges
Model	PaxTower S-PLUS 1T
Category	Construction Equipment
Language	English