ZCS Azzurro 3000SP - Page 38

38 / 58
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 11/06/2019 Rev. 1.8 “User Manual for 3000SP storage inverter”
11. Self-test (only for the Italian market)
Select “11. Self-test” and press “OK” to enter the self-test interface.
Note: this setting is only used in Italy and is therefore visible only if country code 01 or 15 has
been set.
11.Self-Test
1.Fast Self-test
2.STD Self-test
3.Set PF time
3.Set QV time
5.Enable 81.S1
1) Fast self-test
Select “1. Fast Self-Test”, then press “OK” to start the fast self-test, which will be performed
automatically and will take about 15 minutes. The following screens will be shown on the display.
Start Self-test
↓
press “OK” to start
Testing 59.S1...
↓
Wait
Test 59.S1 OK!
↓
Wait
Testing 59.S2...
↓
Wait
Test 59.S2 OK!
↓
Wait
Testing 27.S1...
↓
Wait
Test 27.S1 OK!
↓
Wait
Testing 27.S2...
↓
Wait
Test 27.S2 OK!
↓
Wait
Testing 81>S1...