Zebra ZT410 - Adjust Printer Settings

Printer Configuration and Adjustment
Adjust Printer Settings
100
P1066582-003 ZT400 Series™ User Guide 8/25/15
Adjust Printer Settings
This section presents the printer settings that you can change and identifies the tools for
changing them. These tools include the following:
• ZPL and Set/Get/Do (SGD) commands (See the Zebra
®
Programming Guide for more
information.)
• The printer’s user menus (See Idle Display, Home Menu, and User Menus on page 19 for
more information.)
• The printer’s web pages when the printer has an active wired or wireless print server
connection (See the ZebraNet Wired and Wireless Print Servers User Guide for more
information.)
Copies of the referenced manuals are available at http://www.zebra.com/manuals.
This section contains the following subsections:
• Print Settings on page 101
• Tools on page 108
• Network Settings on page 119
• RFID Settings on page 126
• Language Settings on page 132
• Sensor Settings on page 136
• Port Settings on page 138
• Bluetooth Settings on page 140