Zebra ZT410 - CANCEL Self Test

Troubleshooting
Printer Diagnostics
188
P1066582-003 ZT400 Series™ User Guide 8/25/15
CANCEL Self Test
The CANCEL self test prints a printer configuration label and a network configuration label.
For other ways to print these labels, see Print Information on page 108.
To perform the CANCEL Self Test, complete these steps:
1. Turn off (O) the printer.
2. Press and hold CANCEL while turning on (I) the printer. Hold CANCEL until the first
control panel light turns off.
The printer prints a printer configuration label (Figure 17) and then a network
configuration label (Figure 18).
Figure 17 • Sample Printer
Configuration Label
Figure 18 • Sample Network
Configuration Label