Routine Maintenance
Cleaning Schedule and Procedures
160
P1066582-003 ZT400 Series™ User Guide 8/25/15
Clean the Peel Assembly
The peel assembly, which is part of the Peel-Off and Liner Take-Up options, consists of
several spring-loaded rollers to ensure the proper roller pressure. Clean the pinch roller and
tear-off/peel-off bar if adhesive buildup begins to affect peel performance.
If adhesive buildup affects peel-off performance, complete these steps:
1. Raise the media door.
2.
Caution • Do not use your left hand to assist in closing the Peel assembly. The top edge of
the Peel roller/assembly could pinch your fingers.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Open the printhead assembly by rotating the printhead-open lever.
To Next Page
Loading...