Printer Configuration and Adjustment
Adjust Printer Settings
104
P1066582-003 ZT400 Series™ User Guide 8/25/15
Print Width Specify the width of the labels being used, in dots. The default value is the maximum
width for the printer, based on the printhead’s DPI value.
User menu item:
Main Menu >
SETTINGS
Accepted values:
Note • Setting the width too narrow can result in
portions of a label format not being printed on
the media. Setting the width too wide wastes
formatting memory and can cause the printer to
print off of the label and onto the platen roller.
This setting can affect the horizontal position of
the label format if the image was inverted using
the
^POI ZPL II command.
ZT410 203 dpi =
0002 to 832
ZT410 300 dpi = 0002 to 1248
ZT410 600 dpi = 0002 to 2496
ZT420 203 dpi = 0002 to 1344
ZT420 300 dpi = 0002 to 1984
Related ZPL command(s):
^PW
SGD command used:
ezpl.print_width
Printer web page: View and Modify Printer Settings > Media Setup >
Print Width
Table 5 • Print Settings (Continued)
To Next Page
Loading...