123
Printer Configuration and Adjustment
Adjust Printer Settings
8/25/15 ZT400 Series™ User Guide P1066582-003
IP Protocol This parameter tells if the user (permanent) or the server (dynamic) selects the
IP address. When a dynamic option is chosen, this parameter tells the method(s) by
which the wired or wireless print server receives the IP address from the server.
User menu item:
Main Menu >
NETWORK
Accepted values:
• ALL
• GLEANING ONLY
• RARP
• BOOTP
• DHCP
• DHCP & BOOTP
• PERMANENT
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.protocol
Wireless:
wlan.ip.protocol
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Table 7 • Network Settings (Continued)
To Next Page
Loading...