Printer Configuration and Adjustment
Adjust Printer Settings
128
P1066582-003 ZT400 Series™ User Guide 8/25/15
RFID Test During the RFID test, the printer attempts to read and write to a transponder. No printer
movement occurs with this test.
User menu item:
Main Menu >
RFID
To test an RFID label:
1. Position the RFID label with its transponder over the
RFID antenna array.
2. Press RIGHT SELECT to select START.
The results of the test are shown on the display.
Accepted values:
quick—performs a read EPC test and a write EPC test
(using random data)
read—performs a read EPC test
write—performs a write EPC test (using random data)
SGD command used:
rfid.tag.test.content and
rfid.tag.test.execute
Table 8 • RFID Settings (Continued)
RFID TEST
READ OK
WRITE OK
START
To Next Page
Loading...