Printer Configuration and Adjustment
Adjust Printer Settings
134
P1066582-003 ZT400 Series™ User Guide 8/25/15
Control
Character
The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II
control instruction. Set the control prefix character to match what is used in your label
formats.
User menu item:
Main Menu >
LANGUAGE
Accepted values: 00 to FF
Related ZPL command(s):
^CT or ~CT
SGD command used: zpl.control_character
Printer web page: View and Modify Printer Settings > ZPL Control
Delimiter
Character
The delimiter character is a two-digit hex value used as a parameter place marker in
ZPL/ZPL II format instructions.
Set the delimiter character to match what is used in your label formats.
User menu item:
Main Menu >
LANGUAGE
Accepted values: 00 to FF
Related ZPL command(s):
^CD or ~CD
SGD command used: zpl.delimiter
Printer web page: View and Modify Printer Settings > ZPL Control
Table 9 • Language Settings (Continued)
To Next Page
Loading...