Routine Maintenance
Cleaning Schedule and Procedures
166
P1066582-003 ZT400 Series™ User Guide 8/25/15
7. Using the swab from the Preventive Maintenance Kit (part number 47362), wipe along the
upper cutting surface (
1) and the cutter blade (2). In place of the Preventive Maintenance
Kit, you may use a clean swab dipped in 99.7% isopropyl alcohol. Allow the solvent to
evaporate.
8.
Caution • The cutter blade is sharp. For operator safety, replace the cutter shield.
Replace the cutter shield (1) and secure it with the thumbscrew and lock washer that you
removed earlier (
2).
To Next Page
Loading...