209
Using the USB Host Port and NFC Capability
Near Field Communication (NFC)
8/25/15 P1066582-003
2. Pair your smart device with the printer by holding the smart device next to the
NFC icon on the printer.
a. If necessary, access the Bluetooth information about your printer using your
smart device. For instructions, refer to the manufacturer’s documentation for
your device.
b. If necessary, select the Zebra printer’s serial number to pair it with the device.
c. After your smart device has been detected by the printer, the printer may prompt you
to accept or reject the pairing. If necessary, press the
LEFT SELECT button on the
printer to select ACCEPT. Some smart devices will pair with the printer without this
prompt.
The printer and your device are paired.
3. Start the Zebra Utilities app on your device.
The Zebra Utilities main menu displays.
4. Perform these steps if you have an Apple device:
a. Tap the Settings icon in the lower-right corner.
b. Change the setting for Get Labels From Printer to ON.
c. Tap Done.
BT PAIRING EVENT
SEC. CODE: XXXXXX
ACCEPT REJECT
To Next Page
Loading...