33
Printer Setup and Operation
Load the Media
8/25/15 ZT400 Series™ User Guide P1066582-003
2. Insert media into the printer. Follow the instructions for roll or fanfold media, as
appropriate.
Roll Media
Fanfold Media
2-a. Remove and discard any tags or
labels that are dirty or that are held by
adhesives or tape.
Pull out the media supply guide as far
as it goes.
2-b. Pull out the media supply guide as far
as it goes.
Feed the media through the rear or
bottom access slot.
Rear Feed
Bottom Feed
2-c. Place the roll of media on the media
supply hanger. Push the roll back as
far as it will go.
Drape the media over the media
supply hanger.
To Next Page
Loading...