47
Printer Setup and Operation
Load the Media—Peel-Off Mode (with our without Liner Take-Up)
8/25/15 ZT400 Series™ User Guide P1066582-003
6.
7.
Slide in the media guide until it just touches the edge of the media.
8. Rotate the printhead-open lever (1) downward until it locks the printhead in place.
Caution • Use the peel release lever and your right hand to close the peel assembly.
Do not use your left hand to assist in closing. The top edge of the peel roller/assembly
could pinch your fingers.
Close the peel assembly using the peel-off mechanism release lever.
To Next Page
Loading...