Zebra ZT410 - Page 54

Printer Setup and Operation
Load the Media—Rewind Mode
54
P1066582-003 ZT400 Series™ User Guide 8/25/15
14. Close the media door.
15. Set the printer to Rewind mode (for more information, see Print Mode on page 105).
16. Press PAUSE to exit pause mode and enable printing.
The printer may perform a label calibration or feed a label, depending on your settings.
17. If desired, perform the CANCEL Self Test on page 188 to verify that your printer is able to
print.
Media loading in Cutter mode is complete.