Axio Observer PRELIMINARY NOTE ZEISS
09/2017 431004-6044-008 1
1 PRELIMINARY NOTE
This quick reference guide contains important information on device safety, the intended use of the
device and how to use it safely. The complete operating manual contains further information on usage,
maintenance, changing fuses and troubleshooting.
The complete Axio Observer operating manual is available for download at
www.zeiss.com/Axioobserver
2 COMPLIANCE NOTICE
The Axio Observer microscopes:
have been designed, produced and
tested in compliance with
DIN EN 61010-1 (IEC 61010-1) ”Safety requirements for
electrical equipment for measurement, control and
laboratory use“
and meet the requirements of the ”RoHS Directive“ 2011/65/EG
The Axio Observer models 3, 5, 7
also meet the
DIN EN 61010-2-101 ”Safety requirements for electrical
equipment for measurement, control and laboratory use -
Part 2-101: Special requirements for In Vitro Diagnostic (IVD)
medical devices“
as well as the 98/79/EC Appendix 1 for IVD products (In Vitro Diagnostic)
The Axio Observer models 3 materials, 5 materials, 7 materials
also meet the
as well as the
”Low voltage directive“ 2014/35/EU
”EMC requirements“ 2014/30/EU
Instrument identification marking
mark
Instrument disposal according to EU Directive 2012/19/EC (WEEE).
To Next Page
Loading...
