Need help?Do you have a question about the Zeiss Colibri 7 and is the answer not in the manual?
General| Type | Laser Scanning Microscope |
|---|---|
| Fiber Coupling | Yes |
| Wavelengths | 405 nm, 488 nm, 561 nm |
| Software | ZEN |
| Control | PC-based |
| Application | Live cell imaging, FRAP, FRET |
| Laser Power | Adjustable |
| Beam Expander | Yes |
| Modulation | Acousto-optic tunable filter (AOTF) |
| Dimensions | Varies depending on microscope stand and configuration |
| Weight | Varies depending on microscope stand and configuration |
| Power Supply | 100-240 V, 50/60 Hz |
Information and warnings for safe operation, covering electrical and radiation hazards.
Steps for configuring the Colibri 7 connection and lamp module type using MTB software.
Guide to initial power-up and software startup for the Colibri 7 light source.
Overview of different methods to control the Colibri 7 illumination intensity and settings.
Instructions for controlling Colibri 7 brightness and LEDs using the microscope's TFT display.
Managing Colibri 7 controls and settings through ZEN software.
Using the 'Microscope Control' tool in the 'Locate' tab for managing Colibri 7 LEDs and settings.
To Next Page
