Need help?Do you have a question about the Zeiss Definite Focus.2 and is the answer not in the manual?
Ensure proper grounding and avoid using ungrounded extension cables to prevent contact with mains voltage.
Keep devices with mains connections away from moisture. Damaged mains-conducting parts must be decommissioned.
Always switch off and unplug the device before cleaning or changing fuses to avoid contact with mains voltage.
Use only specified detachable power cables and avoid overheating by using only the correct specifications.
Standby mode only switches off low voltage; unplug the device to disconnect from life-threatening mains voltage.
If safety measures fail, take the device out of service and contact ZEISS Service for repair.
Ensure the device is off before covering and do not obstruct ventilation slats to prevent heat accumulation.
Only use specified fuses and do not short-circuit the fuse box to prevent overheating or fire.
Dispose of defective equipment according to national legal requirements; manufacturers must take back devices.
Details dimensions for the Axio Observer stand and required clearance from walls for air circulation.
Focus on the sample, use the Home button, and toggle Definite Focus.2 using On/Off buttons.
Control focus stabilization and surface detection via ZEN 2.3 software's 'Devices' screen.
Ensure proper grounding and avoid using ungrounded extension cables to prevent contact with mains voltage.
Keep devices with mains connections away from moisture. Damaged mains-conducting parts must be decommissioned.
Always switch off and unplug the device before cleaning or changing fuses to avoid contact with mains voltage.
Use only specified detachable power cables and avoid overheating by using only the correct specifications.
Standby mode only switches off low voltage; unplug the device to disconnect from life-threatening mains voltage.
If safety measures fail, take the device out of service and contact ZEISS Service for repair.
Ensure the device is off before covering and do not obstruct ventilation slats to prevent heat accumulation.
Only use specified fuses and do not short-circuit the fuse box to prevent overheating or fire.
Dispose of defective equipment according to national legal requirements; manufacturers must take back devices.
Details dimensions for the Axio Observer stand and required clearance from walls for air circulation.
Focus on the sample, use the Home button, and toggle Definite Focus.2 using On/Off buttons.
Control focus stabilization and surface detection via ZEN 2.3 software's 'Devices' screen.
General| Brand | Zeiss |
|---|---|
| Model | Definite Focus.2 |
| Category | Microscope |
| Language | English |
To Next Page