What to do if the motion of my Zeiss EXTARO 300 Medical Equipment OPMI is too stiff?
If the motion of your Zeiss Medical Equipment OPMI is too stiff, the friction adjustment screw on the stand might be over tightened. Loosen the friction adjustment screw on the stand as needed.
What to do if the motion of the suspension arm on my Zeiss EXTARO 300 Medical Equipment is too stiff?
If the motion of the suspension arm on your Zeiss Medical Equipment is too stiff, the adjustment screw may be over tightened. Slightly loosen the adjustment screw.
General| Type | Surgical Microscope |
|---|---|
| Illumination | LED |
| Focus | Motorized |
| Light Intensity | Adjustable |
| Shadow Reduction | Yes |
| Magnification | 5x to 25x |
| Application | ENT |
| Integrated Modes | Fluorescence |
| Mounting Options | Ceiling, Floor stand, Wall mount |
| Recording | Optional |
Details the surgical applications and restrictions for the EXTARO 300.
Lists essential precautions and guidelines for safe and proper operation.
Identifies and illustrates key controls located directly on the microscope.
Describes controls found on the yoke and stand of the microscope system.
Provides step-by-step instructions for moving and setting up the microscope.
Guides on connecting power and interface cables to the system.
Explains the importance of balancing the suspension arm and yoke for maneuverability.
Guides on using the camera for image and video capture.
Explains how to control and adjust the illumination intensity of the microscope.
Specifies approved disinfectants and precautions for cleaning device surfaces.
Lists recommended maintenance activities and their required intervals.
Outlines essential safety checks to ensure the system's integrity and user safety.
Provides a table of common faults, their causes, and recommended solutions.
Addresses issues when the Mode Control knob is unresponsive.
To Next Page
