21
the display.
7.6 AUTO
The automatic operation is including recovery, oil drain, vacuum, oil injection,
and recharging, all steps are in one press. Before operation, you must confirm that
the new PAG oil is enough, or it has risk that the air would be sucked into the
vehicle A/C system.
1. In stand by mode, press key to come to auto mode
2. Check the PAG oil bottle to confirm it holds more than 150 ml oil in it, press
the key to continue.
IMPORTANT
PLEASE CONFIRM THE PAG
OIL IS MORE THAN 150 ml
PRESS OK TO NEXT
PLEASE INPUT
REFRIGERANT 500 g
PRESS F TO USE DATABAS
PRESS OK TO START
PLEASE INPUT
OIL QUANTITY 20 ML
PRESS OK TO NEXT
PLEASE INPUT
VACUUM TIME 10 MIN
PRESS OK TO NEXT
To Next Page
Loading...
