Zell AC2000 - Shooting

30
10 Trouble shooting
Fault Cause Remedy
The display shows
„WARNING!
CODE :W16
NOT ENOUGH PRESSURE
TO RECOVERY!.”
This message is
normal, during the
recovery process.
Press to continue
other operations. If you
make sure that there is no
refrigerant in A/C system .
The display shows
„WARNING!
CODE:02
INNER TANK FILLED.”
The inner tank is full of
refrigerant .
Drain the internal
refrigerant container in the
proper manner.
The display shows
„WARNING!
CODE:W01
TANK PRESSURE IS TOO
HIGHT”
This message is normal
during the recovery
process.
Stop and wait for the tank
cooling down. And release
some gases if necessary.
The display shows
„WARNING!
CODE:W08
REFRIGERANT IS NOT
ENOUGH.”
Message during the
recharge. The quantity
of refrigerant is less
than 2KG
Refill the refrigerant into the
internal tank.
The display shows
„WARNING!
CODE:W03
PRESSURE IN SYSTEM
RECOVERY START.”
Message during the
vacuum. It means that
there has refrigerant in
the A/C system.
Recovery the refrigerant
first.