2.1 Usage
1.Store product in a cool and dry place.
2.Do not dispose of the product in heat or fire.
3.Do not expose to moisture or submerge it in liquid.
4.Do not use around strong static electricity or magnetic fields.
5.Do not disassemble the product. Consult official Zendure channels when
service or repair is required. Incorrect disassembly or reassembly may result
in a risk of fire or injury to persons.
6.When using the product, please strictly follow the operating environment
temperature range specified in the user manual. If the temperature is too
high, it may result in a fire or explosion; if the temperature is too low, the
product performance may be severely reduced, or the product may cease to
work.
7.Do not block or obstruct the fan during use or place the product in an
unventilated or dusty area.
8.Ensure the product is not hit, dropped, or heavily vibrated. Securely fasten
the product when transporting to avoid damage. If severely damaged, turn
off the power source immediately and discontinue using the product.
9.If you accidentally drop the product into water during use, please place it in
a safe open area, and stay away from it until it is completely dry. The dried
product should not be used again and should be properly disposed of
according to the Disposal Guide section of this manual.
10.Only clean the ports with a dry cloth.
11.Place on a flat surface to keep the product from falling over. If the product is
overturned and severely damaged, turn it off immediately, place the battery
in an open area, keep it away from people and combustibles, and dispose of
it in accordance with local laws and regulations.
12.Keep out of reach of children and pets.
Temperature
Optimal Operating Temperature
Discharge Temperature
Charge Temperature
-4°F to 140°F (-20°C to 60°C)
32°F to 110°F (0°C to 45°C)
Storage Temperature
32°F to 110°F (0°C to 45°C)
59°F to 95°F (15°C to 35°C)
2. Safety Guidelines
3
To Next Page
Loading...
Need help?
General
