3.4 AC Recharging
You can set the charging power in the Zendure App.
Please use the AC Charging Cable included in the package for fast charging.
Do not use other cables to charge. Plug directly into an AC wall outlet and
make sure that the wall outlet and circuit are rated for more than 15A.
Otherwise, reduce the unit charging speed via the Zendure App. Zendure
assumes no responsibility for any consequences of product misuse,
including but not limited to charging with an unsuitable wall outlet, circuit,
or power cable.
Zendure’s GridFlow fast charge technology is specifically for AC
recharging, offering 1,800W of maximum input power. This limit can be
modified in the Zendure app. In case of unusual situations where the AC
input current remains higher than 20A, the AC input port will initiate a
self-protection function, and the Overload Switch on the product will
automatically pop up. After confirming that there is no product failure,
you can press the Overload Switch to resume charging.
1800W Max
GridFlow
8
To Next Page
Loading...
Need help?
General
