ZENEC ZE-NC3141D - Setup: Main;First Settings; Main Setup Screen Overview; Initial Setup Procedures

28
SETUP: MAIN / FIRST SETTINGS
Main setup screen:
Settings to be made directly after mounting and initial startup:
Set OSD language: Go to Setup>General>Language
to choose your desired OSD
language. Animated picture visualises
your setting.
Set Reverse Camera: Go to Setup>General>Driver Assist
Needs to be enabled once in order to
use the camera. Animated picture
visualises your setting.
Control elements:
 Return to the previous menu.
Works with all four submenus.
 See chapter Setup Video.
 See chapter Setup Audio.
 See chapter Setup General.
 See chapter Setup Misc.


  