p/n 4000087299 v.I
Figure 2-27 - Select which users who should be reachable from incoming calls
We must also define the outgoing behavior. This can either be "Prefix and dial out extension" - which
allows your users to dial out using the trunk with both a prefix and a dial out extension, "Decided by
extension length" - which sends a call over the trunk line if the dialed number is longer than the
configured number of digits. "Dial out extension only" - which only provides a dial out extension for
your users or disabled entirely. Dial out can also be set to "Disabled" if it should not be possible
under any circumstances to call out with this trunk line.
It is also possible to enable call logging on a trunk line. For this option to be active you must have a
6202 Billing Unit connected to your Phontech 6200 network. See more information about this under
the "Configuring storage" and "Call logging" sections.
To Next Page
