Doc.No.: 03118-000
-DE
Page 4 of 16
2.2. MP
A 1601 PA CONTROL UNIT
The MPA 1601 is a full facility operator control unit in the MPA system. It is designed for flush
mounting.
FEATURES:
- Microphone options are Gooseneck, or Handheld.
- RS485 data communication with MPA1600 Operation Unit.
- 6 Zone-selection keys.
- PA (normal paging) key
- Emergency PA key marked with red colour
- Emergency PA key is protected against unauthorised use by means of time-trap functionality
(the Emergency PA key must be held for 1 sec. before activation.
- Dimmer key
- Status-Led for system A and system B.
- Led-indicators for all keys.
- Dimmable Backlight and indication leds
- Local mute relays.
2.3. MPA 1604 PA CONTROL UNIT
The MPA 1604 is an operator control unit without Emergency PA facility in the MPA system. It is
designed for flush mounting.
FEATURES:
- Microphone options are gooseneck, or handheld.
- RS485 data communication with MPA1600 Operation Unit.
- 6 Zone-selection keys.
- PA (normal paging) key.
- Status-Led for system A and system B.
- Led-indicators for all keys.
- Local mute relays.
2.4. MPA 1603 GA ALARM PANEL
The MPA 1603 is a manual alarm control unit in the MPA system. It is designed for flush mounting.
FEATURES:
- RS485 data communication with MPA1600 Operation Unit.
- 4 Alarm keys marked with the text “ALARM” and red colour
- Cancel key.
- Protection against unauthorised use by means of time-trap functionality (the alarm keys and the
Cancel keys must be held for 1 sec. before activation).
- 6 leds indicating alarm status in each zone.
- Led indicators for all keys.
- Dimmable backlight and leds, remotely controlled from the adjacent MPA 1601 Control Unit.
To Next Page
Loading...
