Zenith SENTRY 2 - Step 4. Set the Clock; Step 5. Use Other Options

THE FIRST TIME YOU OPERATE YOUR TV
STEP 4. SET THE CLOCK
I. Press MENU repeatedly until the SETUP MENU is
shown.
2. Press SELECT (SEL) to highlight CLOCK SET.
3. Use numbered buttons on remote control to enter
correct time and TIMER to select AM or PM. You
can also use ADJUST (ADJ) Left/Right to advance
the 24 hour clock.
4. Press ENTER (ENT) to start the clock and return
to normal viewing.
SETUP MENU
AUTO PROGRAM
CH. ADD/DEL
CH. LABELS
TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
LANGUAGE
10:30 AM
Setup Menu with Clock Set Highlighted
STEP 5. USE OTHER OPTIONS
You may want to consider using the following options:
• Program the channels accessed by using CHANNEL
(CH) Up/Down. Refer to the CH. (Channel) ADD/DEL
option for details.
Assign labels (such as ABC) to appear in the Channel/
Time display. Refer to the CH. (Channel) LABELS op-
tion for details.
_,_ 2--2