14
5. Change to the correct date and time. Once you have adjusted the
first value, press the shoot/record button to jump to the next value.
(You will notice the next value will now highlight a blue box).
6. When all adjustments have been made for date and time. Press the
shoot/record button to exit the date-time menu. To exit the settings
press the ON/OFF button once, you will be prompted to press the
shoot/record button to confirm exiting.
6.5 AUTO POWER OFF
The auto power OFF function is designed to help keep the battery
charged longer during use. The ZX-20 will automatically power OFF
after a selected period of inactivity (1, 3, 5 minutes). The ZX-20 is
factory defaulted to 1 minute. To either activate or change this setting,
follow the below steps:
1. Press the ON/OFF button four times, this will open up the settings
menu. Press the shoot/record button to activate the settings page.
2. Press the ON/OFF button twice, this will open up the ZX-20 system
settings menu.
3. Press the down button x times to navigate down the menu to ‘Auto
Shutdown’. You will see this option highlight.
To Next Page
Loading...
