18
6.9 SCREEN SAVER
Record videos and conserve power with the screen saver function,
allowing the LCD display to turn OFF while the ZX-20 continues to
record. There are four options to choose from for the screen saver
function activating. The ZX-20 default setting is set to 10 seconds. To
change the this setting, follow the below steps:
1. Press the ON/OFF button four times, this will open up the settings
menu. Press the shoot/record button to activate the settings page.
2. Press the ON/OFF button twice, this will open up the ZX-20 system
settings menu.
3. Press the down button x times to navigate down the menu to
‘Screen Saver’. You will see this option highlight.
4. Quick press the shoot/record button again once to open the Screen
Saver settings. Four options will appear on the menu: 10 seconds,
20 seconds, 30 seconds and OFF.
Press the
up/down button
to the
option you require, you will see this highlight.
5.
Press the shoot/record button to select.
6. To exit the settings, press the ON/OFF button twice, you will be
prompted to press the shoot/record button to confirm exiting.
Follow the steps for all four screen saver options.
To Next Page
Loading...
