10
5.2 MICRO SD CARD COMPATIBILITY
The ZX-20 requires a Micro SD Card (not included) to save the files
onto. We recommend to use a maximum 64GB, Class 10 or higher
Micro SD Card from a well known brand.
NOTE: There is only one correct way to insert the Micro SD Card into your
ZX-20. Do not force the card into the slot if it does not easily go in. This
may result in damage to both the unit and the card.
5.3 POWERING YOUR ZX-20
To power ON your ZX-20 follow the below steps:
1. Insert the battery into the unit.
2. Press and hold the ON/FF button on the front of the unit until the
start up screen appears.
5.4 FORMAT YOUR SD CARD
Before you start using the ZX-20, we recommend that you format the
Micro SD card. You are able to format the Mico SD card using the ZX-
20, the instructions on how to do this is listed below:
1. Once the ZX-20 is fully charged insert your Micro SD Card into the
correct slot (See the 4.0 COMPONENTS on page 6 on where this is
located on the unit).
To Next Page
Loading...
Need help?
General
