21
7.2 IMAGE RESOLUTION
You have the option of changing the image resolution through the
ZX-20. You can change between 2, 5, 8, 12 and 16 Megapixels.
The ZX-20 is defaulted to shoot at 16 megapixels. To change follow
the below steps:
1. Press the ON/OFF button four times, this will open up the settings
menu. Press the shoot/record button to activate the settings page.
2. Press the ON/OFF button once, this will open up the ZX-20 photo
settings menu.
3. As resolution is the first menu option, you will see this highlighted.
Press the shoot/record button to open up this setting.
4.
Press the
up/down button
to the option you require, you will see this
highlight. To select this option, press the shoot/record button.
5.
To exit the settings, press the ON/OFF button three times, you will
be prompted to press the shoot/record button to confirm exiting.
7.3 TIMER MODE
You are able to change the timer mode on the ZX-20. You can change
between: 3 seconds, 5 seconds, 10 seconds, 20 seconds and OFF. The
ZX-20 default setting is set to OFF. To change follow the below steps:
1. Press the ON/OFF button four times, this will open up the settings
menu. Press the shoot/record button to activate the settings page.
To Next Page
Loading...
