ZERO-X ZX-20 - Time Lapse Recording

26
2. Press the down button three times to navigate down to ‘Loop
recording’ you will see this highlighted. Press the shoot/record
button to open up this setting.
4.
Press the up/down button to the option you require, you will see this
highlight. To select this option, press the shoot/record button.
5.
To exit the settings, press the ON/OFF button four times, you will
be prompted to press the shoot/record button to confirm exiting.
8.4 TIME LAPSE
When using the time lapse feature, the ZX-20 will take a sequence of
photos over a period of time, merging them seamlessly into a sped
up video. There are 8 options to choose from: 0.5 secs, 1 second, 2
seconds, 5 seconds, 10 seconds, 30 seconds and 60 seconds.The ZX-
20 default setting is OFF. To change this follow the below steps:
1. Press the ON/OFF button four times, this will open up the settings
menu. Press the shoot/record button to activate the settings page.
ZX-20 video settings is the first menu that comes up
2. Press the down button twice to navigate down to ‘Time lapse’ you
will see this highlighted. Press the shoot/record button to open up
this setting.
4.
Press the up/down button to the option you require, you will see this
highlight. To select this option, press the shoot/record button.