EasyManua.ls Logo

ZERO-X ZX-30 - Micro SD Card Handling; Powering On and Touch Screen

ZERO-X ZX-30
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
5.2 MICRO SD CARD COMPATIBILITY
The ZX-30 requires a Micro SD Card (not included) to save the files.
We recommend you use a maximum 128GB, UHS Class 3 or higher
Micro SD Card from a well known brand.
NOTE: There is only one correct way to insert the Micro SD Card into your ZX-30. It should
easily slide in. Do not force the card into the slot as it may damage the unit and the
card.
5.3 TOUCH SCREEN COMPONENTS
5.4 POWERING ON YOUR ZX-30
To power ON your ZX-30 follow the below steps:
1. Insert the battery into the unit.
2. PRESS and hold the ON/OFF BUTTON on the front of the unit
until the start up screen appears.
1
2 3 4
765
1. Current Mode
2.
Micro SD Card Inserted
3. Microphone ON
4. Battery Level
5. Playback
6. Mode Selection
7. Settings

Related product manuals