24
6.15 KEYPAD TONE
You have the ability to change the volume of your keypad tone on the
ZX-30. There are 3 volumes to choose from (High, Middle and Low).
The ZX-30 default setting is Middle. To change, follow the below
steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the screen, this
will open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe left to right. You may need to PRESS
the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Scroll down the list by swiping from bottom to top until you
reach KEYPAD TONE. PRESS on this option. The KEYPAD TONE
SETTINGS screen will pop up.
5. You can scroll through the options by swiping UP and DOWN on
the screen. PRESS on the option that you prefer. The setting will
now be updated.
To Next Page
Loading...
Need help?
General
