20
6.11 ROTATE IMAGE
You have the ability to flip the image vertically (upside down) when
you are using the ZX-30, by turning on this function. The ZX-30 default
setting is OFF. To change this setting, follow the steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the screen, this
will open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Image Rotation is the first option on the settings menu. You will
notice there is a small box with TURN OFF next to it. PRESS the
box to activate this function. It will now say TURN ON. The camera
image will now be flipped vertically (upside down).
To Next Page
Loading...
