30
7.3 LOOP MODE
To use LOOP MODE (also known as Loop Recording), follow the steps
under “7.0 PICTURE & VIDEO SETTINGS” ON PAGE 25. Press
LOOP to activate this mode.
There are multiple settings in this mode that you can adjust to your
preferred option. To change these settings please follow the below
steps once you are in LOOP MODE.
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the screen, this
will open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. The settings will automatically open the LOOP MODE.
Swipe up and down to scroll through the settings to adjust.
4. To adjust, PRESS on the setting you wish to change and PRESS
on the option you wish to change. This will update the setting.
Please see the table on the next page to view other available settings.
To Next Page
Loading...
Need help?
General
