32
7.4 LAPSE MODE
To use LAPSE MODE (also know as time lapse mode which takes a
sequence of photos in a selected interval of time), follow the steps
under “7.0 PICTURE & VIDEO SETTINGS” ON PAGE 25. Press
LAPSE to activate this mode.
There are multiple settings in this mode that you can adjust. To change
these settings please follow the below steps once you are in LAPSE
MODE.
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the screen, this
will open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. The settings will open up on the LAPSE MODE SETTINGS
automatically. Swipe up and down to scroll through the settings
you can adjust.
4. To adjust, PRESS on the setting you wish to change and select
your choice. This will update the setting.
Please see the table on the next page to view other available settings.
To Next Page
Loading...
Need help?
General
