22
6.13 SCREEN SAVER
You can record videos and conserve power with the screen saver
function, allowing the LCD display to turn OFF while the ZX-30
continues to record. There are four options to choose from for
the screen saver function activating: 30 SECONDS, 1 MINUTE, 2
MINUTES and OFF. The ZX-30 default setting is set to 30 SECONDS.
To change the this setting, follow the below steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the button on the bottom right of the screen, this will
open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Scroll down the list by swiping from bottom to top until you reach
SCREEN SAVER. PRESS on this option. The SCREEN SAVER
SETTINGS screen will pop up.
5. You can scroll through the options by swiping UP and DOWN on
the screen. PRESS on the option that you prefer. The setting will
now be updated.
To Next Page
Loading...
Need help?
General
