16
6.7 AUTO POWER OFF
The AUTO POWER OFF function is designed to help extend the
battery life of the ZX-30. The ZX-30 will automatically power OFF after
a selected period of inactivity (3, 5, 10 minutes and OFF). The ZX-30
is factory defaulted to 3 minutes. To change this setting, follow the
below steps:
1. If you are currently in VIDEO MODE and RECORDING, you
will need to PRESS the SHOOT/RECORD BUTTON to end the
recording first.
2. PRESS the
BUTTON on the bottom right of the screen, this
will open up the SETTINGS MENU. A pop up with two locks and
arrows may appear. Swipe from left to right. You may need to
PRESS the
BUTTON again.
3. PRESS the
tab on the left side of the screen. The current
section tab will be highlighted blue.
4. Scroll down the list by swiping from bottom to top until you reach
AUTO POWER OFF. PRESS on this option. The AUTO POWER
OFF SETTINGS screen will pop up.
5. You can scroll through the options by swiping up and down on the
screen. PRESS on the option that you prefer. The setting will now
be updated.
To Next Page
Loading...
Need help?
General
