When the key in the switch box is moved to position I, the
home screen is displayed on the display.
C15N030
After about three seconds the main screen is displayed on
the display.
1 - total operating hours (the value cannot be reset)
2 - operating hours of the tractor since the last reset of the
value
3 - total distance covered (the value cannot be reset)
4 - distance covered by the tractor since the last reset of
the value
P18N043
1 - urea consumptio
2 - degree of the DPF filter clogging by carbon black
3 - degree of the DPF filter clogging by fly ash (not
displayed)
4 - amount of urea in the tank in percentage if the amount
of urea in the tank is higher than 32% of the content, OK
symbol is displayed
P18N044
1 - engine revolutions
2 - engine load
3 - immediate fuel consumption
P18N045
To Next Page
Loading...
